Yamaha MCR730B User Manual - Page 60

Chapter 10: Initial Settings 3 Press Play/Pause ( / ) repeatedly to select "HDMI CLEAR." If you change your mind at this point, select "DVD - NO REQ." instead. 4 Press STANDBY/ON. The HDMI Resolution is reset to its default setting and the DRX-730 goes on standby. Press STANDBY/ON again to turn it back on. The HDMI Audio setting (page 13) is set to off. ■ HDMI Color Sets the HDMI color output. • Full range RGB: Provides very bright whites and deep blacks. • RGB: Select this if white and black areas of the picture are too pronounced with the Full range RGB option. • Component: This is the standard component video format used by HDMI components. The default setting changes depending on the connected HDMI component. Language settings For the Other Languages options of the Audio Language, Subtitle Language, and DVD Menu Lang. settings, you can also specify the language by using the 2-letter abbreviations or 4-digit codes listed on page 62. 1 Select "Other Languages," and then press ENTER. 2 Use Left/Right ( / ) to select a language by abbreviation. For some languages, only the code number is displayed. • To specify a language by using the 4-digit codes, use Up/Down ( / ) or the number buttons to enter the appropriate code, and then press ENTER. ■ Audio Language Sets the default soundtrack language to be used with DVD-Video discs. • English (default): English soundtrack will be used if available. • Languages: Selected language will be used if available. (Available languages depends on where you purchased the DRX-730.) • Other Languages: Use the language abbreviations and codes listed on page 62 to specify languages not listed above. Notes: • With some DVD-Video discs, the soundtrack language will be set by the disc regardless of this setting. • With some DVD-Video discs, you can select the soundtrack language from a menu. In this case, press MENU to display the menu, and then select the soundtrack language. ■ Subtitle Language Sets the default subtitle language to be used with DVD-Video discs. • English (default): English subtitles will be used if available. • Languages: Subtitles in the selected language will be used if available. (Available languages depends on where you purchased the DRX-730.) • Other Languages: Use the language abbreviations and codes listed on page 62 to specify languages not listed above. Notes: • With some DVD-Video discs, the subtitle language will be set by the disc regardless of this setting. • With some DVD-Video discs, you can select the subtitle language from a menu. In this case, press MENU to display the menu, and then select the subtitle language. • The Subtitle Language setting also applies to ® DivX discs that use external subtitle files (see "About DivX®" on page 58). ■ DVD Menu Lang. Sets the default language to be used for menus on ® DVD-Video discs and some DivX discs. • w/Subtitle Lang. (default): Menus in the same language as that specified for the Subtitle Language setting will be used if available. • Languages: Menus in the selected language will be used if available. (Available languages depends on where you purchased the DRX-730.) • Other Languages: Use the language abbreviations and codes listed on page 62 to specify languages not listed above. 54 En