Yamaha MGP16X Owner's Manual - Page 31

Appendix Analog Input Specifications Input Connectors PAD Gain Input Impedance MONO CH INPUT MGP16X: 1-8 MGP12X: 1-4 -60 dB 0 -16 dB -34 dB 26 dB +10 dB 3k ohms -60 dB STEREO CH INPUT - 3k ohms -16 dB MGP16X: 9-12 MGP12X: 5-8 -34 dB - 10k ohms +10 dB STEREO CH INPUT - -34 dB MGP16X: 13-16 10k ohms MGP12X: 9-12 - +10 dB MONO CH INSERT IN MGP16X: 1-8 MGP12X: 1-4 - - 10k ohms RETURN (L, R) - - 10k ohms 2TR IN (L, R) - - 10k ohms Appropriate Impedance 50-600 ohms Mics 600 ohms Lines 50-600 ohms Mics 600 ohms Lines 600 ohms Lines 600 ohms Lines 600 ohms Lines 600 ohms Lines Sensitivity*1 Input level Nominal Connector Max. before Clipping Specifications -80 dBu (0.078 mV) -60 dBu (0.775 mV) -40 dBu (7.75 mV) -36 dBu (12.3 mV) -16 dBu (123 mV) +4 dBu (1.23 V) Combo jack*2 -54 dBu (1.55 mV) -34 dBu (15.5 mV) -14 dBu (155 mV) -10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) -80 dBu (0.078 mV) -60 dBu (0.775 mV) -40 dBu (7.75 mV) XLR-3-31 type*3 -36 dBu (12.3 mV) -16 dBu (123 mV) -6 dBu (389 mV) -54 dBu (1.55 mV) -34 dBu (15.5 mV) -14 dBu (155 mV) Phone jack*4 -10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) -54 dBu (1.55 mV) -34 dBu (15.5 mV) -14 dBu (155 mV) Phone jack*4 -10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) RCA pin jack -20 dBu (77.5 mV) 0 dBu (0.775 V) +20 dBu (7.75 V) Phone jack (TRS)*5 -12 dBu (195 mV) +4 dBu (1.23 V) +24 dBu (12.3 V) Phone jack*4 -26 dBV (50.1 mV) -10 dBV (0.316 V) +10 dBV (3.16 V) RCA pin jack 0 dBu=0.775 Vrms, 0 dBV=1 Vrms *1 Sensitivity: The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (All faders and level controls are at their maximum position.) *2 Combo jacks are balanced (1&Sleeve=GND, 2&Tip=HOT, 3&Ring=COLD) *3 XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD) *4 Phone jacks are unbalanced. *5 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND) Analog Output Specifications Output Connectors STEREO OUT (L, R) GROUP OUT (1-4) AUX SEND (1, 2) FX SEND (1, 2) MONO CH INSERT OUT MGP16X: 1-8 MGP12X: 1-4 REC OUT (L, R) MONITOR OUT (L, R) PHONES Output Impedance 75 ohms 150 ohms 75 ohms 150 ohms 150 ohms 600 ohms 150 ohms 100 ohms Appropriate Impedance 600 ohms Lines 10k ohms Lines 600 ohms Lines 10k ohms Lines 10k ohms Lines 10k ohms Lines 10k ohms Lines 40 ohms Phones Output Level Connector Nominal Max. before Clipping Specifications +4 dBu (1.23 V) +24 dBu (12.3 V) XLR-3-32 type*1 Phone jack*4 +4 dBu (1.23 V) +20 dBu (7.75 V) Phone jack*2 +4 dBu (1.23 V) +24 dBu (12.3 V) XLR-3-32 type*1 +4 dBu (1.23 V) +20 dBu (7.75 V) Phone jack*2 0 dBu (0.775 V) +20 dBu (7.75 V) Phone jack*3 -10 dBV (0.316 V) +4 dBu (1.23 V) 3 mW +10 dBV (3.16 V) +20 dBu (7.75 V) 75 mW RCA pin jack Phone jack*2 Stereo phone jack 0 dBu=0.775 Vrms, 0 dBV=1 Vrms *1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD) *2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND) *3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND) *4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND) Digital Input Specifications Connector USB IN Format iPod, iPhone exclusive Connector Specification USB A type MGP16X/MGP12X Owner's Manual 31