Yamaha MW12CX Owners Manual - Page 26

Reference Specifications ■ Analog Input Specifications Input Connectors Gain Input Appropriate Impedance Impedance CH INPUT MIC (CHs 1-4) -60 dB 3kΩ 50-600Ω Mics -16 dB CH INPUT LINE (CHs 1-4) -34 dB +10 dB 10kΩ 600Ω Lines -60 dB ST CH MIC INPUT (CHs 5/6, 7/8) 3kΩ 50-600Ω Mics -16 dB ST CH LINE INPUT (CHs 5/6, 7/8) ST CH INPUT (CHs 9/10, 11/12) CH INSERT IN (CHs 1-4) RETURN (L, R) 2TR IN (L, R) -34 dB +10 dB - - - - 10kΩ 10kΩ 10kΩ 10kΩ 10kΩ 600Ω Lines 600Ω Lines 600Ω Lines 600Ω Lines 600Ω Lines Sensitivity * -80 dBu (0.078 mV) -36 dBu (12.3 mV) -54 dBu (1.55 mV) -10 dBu (245 mV) -80 dBu (0.078 mV) -36 dBu (12.3 mV) -54 dBu (1.55 mV) -10 dBu (245 mV) -30 dBu (24.5 mV) -20 dBu (77.5 mV) -12 dBu (195 mV) -26 dBV (50.1 mV) Nominal Level -60 dBu (0.775 mV) -16 dBu (123 mV) -34 dBu (15.5 mV) +10 dBu (2.45 V) -60 dBu (0.775 mV) -16 dBu (123 mV) -34 dBu (15.5 mV) +10 dBu (2.45 V) -10 dBu (245 mV) 0 dBu (0.775 V) +4 dBu (1.23 V) -10dBV (0.316V) Max. before Clipping -40 dBu (7.75 mV) +4 dBu (1.23 V) -14 dBu (155 mV) +30 dBu (24.5 V) -40 dBu (7.75 mV) -6 dBu (389 mV) -14 dBu (155 mV) +30 dBu (24.5 V) +10 dBu (2.45 V) +20 dBu (7.75 V) +24 dBu (12.3 V) +10dBV (3.16 V) Connector Specifications XLR-3-31 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) TRS phone jack (balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) XLR-3-31 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) Phone jack (unbalanced) Phone jack (unbalanced) RCA pin jack TRS phone Jack (unbalanced [Tip = Out, Ring = In, Sleeve = GND]) Phone jack (unbalanced) RCA pin jack Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms * Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to the maximum level. (All faders and level controls are at their maximum position.) ■ Analog Output Specifications Output Connectors STEREO OUT (L, R) REC OUT2 (L, R) EFFECT/AUX (AUX1, 2*) SEND CH INSERT OUT (CHs 1-4) REC OUT1 (L, R) MONITOR OUT (L, R) PHONES OUT Output Impedance 75Ω 150Ω 150Ω 75Ω 600Ω 150Ω 100Ω Appropriate Impedance Nominal Level 600Ω Lines +4dBu (1.23 V) 10kΩ Lines +4dBu (1.23 V) 10kΩ Lines +4dBu (1.23 V) 10kΩ Lines 10kΩ Lines 10kΩ Lines 40Ω Phones 0 dBu (0.775 V) -10 dBV (0.316 V) +4 dBu (1.23 V) 3 mW Max. before clipping +24 dBu (12.3 V) +20 dBu (7.75 V) +20 dBu (7.75 V) +20 dBu (7.75 V) +10 dBV (3.16 V) +20 dBu (7.75 V) 75 mW Connector Specifications XLR-3-32 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) TRS phone jack (balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) TRS phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) TRS phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) TRS phone jack (unbalanced [Tip = Out, Ring = In, Sleeve = GND]) RCA pin jack TRS phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) TRS phone jack Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms * The MW12CX feature is described first, followed by the MW12C feature in brackets: MW12CX (MW12C) ■ Digital Input/Output Specifications Connector USB Format USB Audio 1.1 Data Length 16 bit Connector Specification USB B type 92 MW12CX/MW12C Owner's Manual