Yamaha PR7 Owner's Manual - Page 26
Error messages
View all Yamaha PR7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Error messages Error messages Unit status or function Built-in memory error Error Messages Int Error microSD card error Low battery No file No microSD card File full Built-in memory full microSD card full Sd Error Lo bAt no FILE no SD FILE FULL Int FULL Sd FULL Slow in recording into a microSD card REC Error File format error during overdubbing File is too short. Dividing position error. The [FILE] button was pressed while the MUSIC folder was selected. dUb Error Edit Error File deletion error dEL Error Marker addition error Add Error Recording level setting disabled error ALC On Excessive input level PEAK Action Initialize the built-in memory. ➔ Power on while pressing and holding down [REC SET] > "ForMAt" > "Int" > "y" (Yes) (Reference Manual "System setting menu.") ➔ If the error persists after initialization, the unit may be malfunctioning. Re-insert the card (page 10) or format the card. ➔ Power on while pressing and holding down [REC SET] > "ForMAt" > "Sd" > "y" (Yes) (Reference Manual "System setting menu.") ➔ If the error persists after formatting, the unit or the microSD card may be malfunctioning. Replace the battery with a new one (page 10). Select a folder that contains a file (page 13). Insert a microSD card (page 10). Select a folder that contains fewer than 99 files (page 13), or delete unnecessary files from the folder (page 21). Delete unnecessary files from the built-in memory (page 21), copy files to a microSD card (page 22), or move files to a computer (page 24). Delete unnecessary files from the microSD card (page 21), or move files to a computer (page 24). Select a recording format for lower sound quality (page 13) or re-format the microSD card. ➔ Power on while pressing and holding down [REC SET] > "ForMAt" > "Sd" > "y" (Yes) (Reference Manual "System setting menu.") ➔ If the error persists after re-formatting, the unit or the microSD card may be malfunctioning. Select a file in a format that is supported for recording (page 13). Select a file that is longer than two seconds. Set the dividing position to anywhere in the middle. Avoid the start or end of the file (page 22). Select the REC folder (page 14). From the connected computer, de-select "Read only" in the file's property panel, and cancel write-protection for the microSD card. Position the marker away from the closest markers by two seconds or more (page 18). Set the type of dynamics control to "OFF" or "LIM" (page 16). Adjust the recording level (page 18) Dynamics control (page 16) 26 Owner's Manual