Yamaha PSR-1000 Owner's Manual - Page 153
Playing the sounds of the PSR-2000/1000 through an external audio system, and recording the sou... - adaptor
View all Yamaha PSR-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Using Your PSR-2000/1000 with Other Devices 3 Playing the sounds of the PSR-2000/1000 through an external audio system, and recording the sounds to an external recorder (AUX OUT/ OUTPUT jacks) You can connect the PSR-2000/1000 to a wide range of audio equipment by using the AUX OUT and OUTPUT jacks. Connect as shown in the illustrations below using standard audio cables. 4 Using the Pedal (footswitch) or Foot Controller (FOOT PEDAL 1/2 jack) By connecting a Foot Switch (the FC4 or FC5) to one of the FOOT PEDAL jacks, you can replicate the function of some panel buttons, doing things like starting and stopping accompaniment. By connecting an optional Foot Controller (such as the FC7) to the FOOT PEDAL 2 jack, you can control any one of a variety of important functions with your foot - such as dynamically adjusting the volume as you play (page 139). Use audio cables and adaptor plugs with no resistance. The polarity of the foot switch (normal or reverse) can also be changed (page 139). CAUTION When the PSR-2000/1000 AUX OUT and OUTPUT jacks are connected to an external audio system, first turn on the power to the PSR-2000/1000, then to the external audio system. Reverse this order when you turn the power off. RCA pin plug AUX IN Audio cable RCA pin plug To powered speaker Phone plug (standard) Cassette tape recorder stereo system When these are connected (with RCA pin plug; LEVEL FIXED), the sound is output to the external device at a fixed level, regardless of the [MASTER VOLUME] control setting. R L AUX OUT (LEVEL FIXED) R L/L+R OUTPUT When these are connected (with standard phone plugs), you can use the [MASTER VOLUME] control to adjust the volume of the sound output to the external device. CAUTION Make sure to connect or disconnect the pedal only when the power is turned off. 5 Connecting external MIDI devices (MIDI terminals) Using a standard MIDI cable, connect the external MIDI device to the MIDI terminal(s) of the PSR-2000/1000. Make sure to set the HOST SELECT switch (page 18) to MIDI when you use these connectors. For more information about connections, see "What You Can Do With MIDI" on page 158. MIDI IN ...........Receives MIDI messages from an external MIDI device MIDI OUT........Sends out MIDI messages generated by the PSR-2000/1000 For a general overview of MIDI and how you can effectively use it, refer to the following sections: • What's MIDI? (page 155) • What You Can Do With MIDI (page 158) • MIDI functions (page 145) • If you connect the PSR-2000/1000 to a monaural device, use only the OUTPUT L/L+R jack. • Never use MIDI cables longer than 15 meters. PSR-2000/1000 153