Yamaha RX V2700 MCXSP10 Manual - Page 50

SOUND FIELD PROGRAMS SOUND FIELD PROGRAMS This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience. y • When you set the "Decoder Mode" parameter in "Input Select" to "Auto", this unit selects the appropriate digital decoder according to the input signal. • The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources. • The YAMAHA HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from the front, back, left and right. • You can select sound field programs and adjust the parameters by using the GUI screen. See page 88 for details. Selecting sound field programs Notes • When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source. • Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 43) and Audio input jack select is set to "ANALOG" (see page 42). • When you play back DSD sources with any sound field program, this unit converts the DSD signals to PCM signals and then applies the selected program. • When you play back DTS 96/24 sources with any sound field program, this unit applies the selected program without activating the DTS 96/24 decoder. • Sampling frequencies higher than 48 kHz are sampled down to 48 kHz or lower and then sound field programs are applied. y You can select the desired sound field programs and setting the parameters by using GUI screen. see page 88 for details. ■ Front panel operations ■ Remote control operations MAIN ZONE ON/OFF ON OFF MASTER INPUT (U.S.A. model) AUDIO SELECT TONE REC OUT/ CONTROL ZONE2 A/B/C/D/E PRESET/TUNING PRESET/ TUNING MEMORY TUNING FM/AM MAN'L/AUTO FM MODE ENHANCER NIGHT STRAIGHT EFFECT YPAO SILENT CINEMA EDIT MULTI ZONE S VIDEO VIDEO ZONE ON/OFF ZONE CONTROLS ZONE 2 ZONE 3 L AUDIO R OPTICAL PROGRAM OPTIMIZER MIC PHONES VIDEO AUX USB PURE DIRECT VOLUME PROGRAM selector ++ TV VOL CH -- + VOLUME - AMP SOURCE TV TV MUTE LEVEL TITLE BAND TV INPUT MUTE PRESET/CH SET MENU MENU SRCH MODE PURE DIRECT ENTER AUDIO RETURN MEMORY A/B/C/D/E STRAIGHT DISPLAY EFFECT CLASSICAL LIVE/CLUB ENTERTAIN MOVIE 1 2 3 4 STEREO SUR. DECODE SELECT EXTD SUR. 5 6 7 8 1 MEMORY 2 9 0 NIGHT ENHANCER +10 ENT (U.S.A. model) AMP Sound field program selector buttons Rotate the PROGRAM selector on the front panel. The name of the selected sound field program appears in the front panel display and in the short message display. Set the operation mode selector to AMP and then press one of the sound field program selector buttons on the remote control repeatedly. The name of the selected sound field program appears in the front panel display and in the short message display. 46 En