Yamaha TSS-10 Owner's Manual

Yamaha TSS-10 Manual

Yamaha TSS-10 manual content summary:

  • Yamaha TSS-10 | Owner's Manual - Page 1
    U B HOME THEATER SOUND SYSTEM TSS-10 INPUT DIGITAL 1 DIGITAL 2 ANALOG MODE DTS DIGITAL PL MOVIE PL MUSIC VOLUME TRIM 7 +6 6 +4 5 +2 4 0 3 -2 2 -4 1 -6 SILENT Active Servo Technology STANDBY/ON TSS-10 HOME THEATER SOUND SYSTEM INPUT MODE REAR S.WOOFER VOLUME MUTE TEST OWNER'S MANUAL
  • Yamaha TSS-10 | Owner's Manual - Page 2
    qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. 17 When not planning to use this system for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet. 18 Be sure to read the "TROUBLESHOOTING" section
  • Yamaha TSS-10 | Owner's Manual - Page 3
    surround sound by using headphones. CONTENTS PREPARATION FEATURES 1 CHECKING THE ACCESSORIES 2 INSTALLING BATTERIES IN THE REMOTE CONTROL 2 CONTROLS AND FUNCTIONS 3 SETTING UP THE SYSTEM 5 CONNECTIONS 7 Connecting audio components 8 Connecting the speakers 9 Connecting the power cable 10
  • Yamaha TSS-10 | Owner's Manual - Page 4
    Check your package to make sure it contains the following items. Remote control INPUT MODE REAR S.WOOFER VOLUME MUTE TEST Batteries (AAA, R03, UM-4) Power cable Fastener (1 set) Non-skid pads (for the center speaker) (3 sets: 24 pieces) AC adaptor (LSE9802B1540) 3.5 mm stereo mini/ RCA
  • Yamaha TSS-10 | Owner's Manual - Page 5
    AND FUNCTIONS Front panel Remote control INPUT DIGITAL 1 DIGITAL 2 ANALOG MODE DTS DIGITAL PL MOVIE PL MUSIC VOLUME TRIM 7 +6 6 +4 5 +2 4 0 3 -2 2 -4 1 -6 1 2 3 1 INPUT 5 2 MODE 7 REAR 8 S.WOOFER VOLUME 3 9 MUTE TEST 0 SILENT STANDBY/ON 4 65 1 INPUT
  • Yamaha TSS-10 | Owner's Manual - Page 6
    up. Standby mode In this mode, this system will consume a small amount of power in order to receive infrared-signals from the remote control. 6 SILENT Stereo headphones can be connected to this mini-jack for private listening. Sound output from the speakers is cut off when headphones are connected
  • Yamaha TSS-10 | Owner's Manual - Page 7
    in their respective positions. The positioning of the speakers is important because it controls the overall sound quality of this system. Place the speakers depending on your listening position by following the instructions below. * The front/center/rear speakers can be mounted on a wall. (See the
  • Yamaha TSS-10 | Owner's Manual - Page 8
    speaker and on top of the monitor to prevent the speaker from falling. * Do not place the speaker on top of the monitor with an inclination of more than 10 degrees. Non-skid 10؇ pads 10؇ Fastener 2 Adjust the speaker -skid pads Wall/ wall support Warning • Each speaker weighs 0.4 kg (0.9 lbs
  • Yamaha TSS-10 | Owner's Manual - Page 9
    SILENT Active Servo Technology STANDBY/ON TSS-10 HOME THEATER SOUND SYSTEM * This system cannot be connected to video signal input/ output terminals of a TV, VCR, DVD player, etc. Left rear speaker Right rear speaker English Left front speaker Center speaker Right front speaker Subwoofer 7
  • Yamaha TSS-10 | Owner's Manual - Page 10
    +6 6 +4 5 +2 4 0 3 -2 2 -4 1 -6 SILENT STANDBY/ON SPEAKER OUTPUTS FRONT L R REAR (SURROUND) L R CENTER S. WOOFER DC IN 15V DIGITAL using an optical cable. These connections bring you digital sound. • When connecting a VCR, etc. without a digital TSS-10 cannot record any audio or video source. 8
  • Yamaha TSS-10 | Owner's Manual - Page 11
    the amplifier unit are only designed for connection of the supplied speakers. Never connect these terminals to an AV amplifier or a power amplifier, as it may cause misoperation, fire and/or damage to this system. • Secure the speaker cables so that they will not catch on hands or feet. 9 English
  • Yamaha TSS-10 | Owner's Manual - Page 12
    cable into the wall outlet. Notes • Disconnect the power cable if you will not use this system for an extended period. • When placing the included AC adaptor on the rack, etc., be sure than the amplifier unit of this system. AC adaptor (included) Power cable (U.S.A. model) (included) To AC outlet
  • Yamaha TSS-10 | Owner's Manual - Page 13
    Use the test tone to balance the output levels of the speakers. Notes • The adjustment of each speaker output level should be made at your listening position using the remote control. • The test tone may not be heard if the volume level of this system is too low. Confirm that the volume is set to
  • Yamaha TSS-10 | Owner's Manual - Page 14
    video components connected to this system. Front panel Remote control INPUT DIGITAL 1 DIGITAL 2 ANALOG . Refer to the operation instructions for the component. 5 Adjust the front and rear speakers While listening to a source I To mute the sound Press MUTE on the remote control. To resume the audio
  • Yamaha TSS-10 | Owner's Manual - Page 15
    SELECTING THE SURROUND MODE OPERATION This system provides you with four surround modes for theaterlike surround sound enjoyment. For the best results, choose a mode appropriate for the selected audio source. Front panel Remote control 1 Play a source. Refer to "Playing a source" on page 12
  • Yamaha TSS-10 | Owner's Manual - Page 16
    instruction below does not help, set this system to the standby mode, disconnect the power cable, and contact the nearest authorized YAMAHA dealer or service center. Problem , and the center and rear speakers reproduce sounds since the surround format is decoded. 10 - 8 - 9 12 9 12 12 - 13 - 12
  • Yamaha TSS-10 | Owner's Manual - Page 17
    TROUBLESHOOTING Problem Though a Dolby Digital encoded source is inputted to this system and the DIGITAL mode is selected, no sound is outputted from the center and rear speakers. A DTS or Dolby Digital encoded source cannot be played in the DTS or DIGITAL mode. (Neither the DTS nor DIGITAL mode
  • Yamaha TSS-10 | Owner's Manual - Page 18
    sounds heard in this way. The specific acoustic space of a particular building is called a sound field. I Dolby Surround In movie theaters and in live theaters, the spectators are surrounded by many speakers and sound 5.1 speaker configurations that are currently available for home theater systems. I
  • Yamaha TSS-10 | Owner's Manual - Page 19
    SPECIFICATIONS Amplifier unit Output Power per Channel Front/center/rear: 6W (1 kHz, 4Ω, 10% THD) Subwoofer: 18W (100 Hz, 4Ω, 10% THD) Input Sensitivity that all specifications are subject to change without notice. Front/center/rear speakers Type Full range speaker system Acoustic suspension
  • Yamaha TSS-10 | Owner's Manual - Page 20
    the instructions found in the users manual, may and "ON", please try to eliminate the problem by using one of the following measures: sounds is often undetectable until it is too late, YAMAHA YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

TSS-10
HOME THEATER SOUND SYSTEM
DIGITAL 1
DIGITAL 2
ANALOG
DTS
INPUT
MODE
VOLUME
DIGITAL
7
6
5
4
3
2
1
+6
+4
+2
0
–2
–4
–6
PL
MOVIE
PL
MUSIC
INPUT
MODE
REAR
MUTE
TEST
S.WOOFER
VOLUME
STANDBY/ON
TSS-10
U B
HOME THEATER SOUND SYSTEM
OWNER’S MANUAL