Yamaha TYROS Owners Manual - Page 129

3 Program the Registration Sequence. Determines which pedal is used to reverse (decrement) through the sequence. Determines which pedal is used to advance (increment) through the sequence. Indicates the file name of the selected Registration Memory bank. Turns the Registration Sequence function on/off. When this is set to "ON," the programmed Registration Sequence is shown at the top right of the Main display, and you can step through the sequence in this display by using the [BACK]/ [NEXT] buttons or the pedal. Reference Registration Memory • When both "Regist (+) Pedal" and "Regist (-) Pedal" are set to "OFF," the pedals cannot be used to step through the Registration Sequence; only the [BACK]/ [NEXT] buttons can be used in the MAIN display. Indicates the Registration Memory preset numbers, in the order of the current Registration Sequence. These move the cursor position in the sequence. Deletes all Registration Memory numbers in the sequence. Deletes the number at the cursor position. The controls in this section are used for specifying the order for calling up Regis- Inserts the number of the currently selected Registration Memory preset immediately before the cursor position. tration Memory number as Replaces the number at the cursor position with the currently a Registration Sequence. selected Registration Memory number. Registration Sequence data is included as part of the Registration Memory bank file. To store your newly programmed Registration Sequence, save the current Registration Memory bank file (in step #5 below). Any Registration Sequence data is lost when changing Registration Memory banks or when turning the power off, unless you've saved it with the Registration Memory bank file. Determines how Registration Sequence behaves when reaching the end of the sequence. STOP Pressing the [NEXT] button or the "advance" pedal has no effect. The sequence is "stopped." TOP The sequence starts again at the beginning. NEXTBANK The sequence automatically moves to the beginning of the next Registration Memory bank in the same folder. 4 After setting the REGISTRATION SEQUENCE ENABLE to on, press the [EXIT] button to return to the Main display and confirm whether the Registration Memory numbers are called up according to the sequence programmed above. • Use the [NEXT] button to call up the Registration Memory numbers in the order of the sequence, or use the [BACK] button to call them up in reverse order. The [BACK]/[NEXT] buttons can only be used for Registration Sequence when the Main display is called up. • Use a connected foot pedal to select the Registration Memory numbers in order. The foot pedal can be used for Registration Sequence no matter which display is called up (except for the display in step #3 above). BACK NEXT BACK NEXT The Registration Sequence is indicated at the top of the Main display, letting you confirm the currently selected number. When the SEQUENCE END is set to "NEXT BANK," the sequence automatically moves to the beginning of the next Registration Memory bank in the same folder. • You can easily resets the Registration Sequence and go back to the first entry by holding down the pedal for a few seconds (the red box indicator at the top right goes out). Press and release the foot pedal to re-select the first entry in the sequence. 5 Call up the Open/Save display for the Registration Memory Bank and save the Regis- tration Sequence setting as a Registration Memory Bank file. TYROS Owner's Manual 129 127