Yamaha TYROS Owners Manual - Page 20

Starting Up This section contains information about setting up your TYROS and preparing to play. Be sure to read through this section carefully before turning the power on. Power Supply 1 Make sure the POWER ON/OFF switch on the TYROS is set to OFF. 2 Connect the supplied power cord to the AC INLET terminal on the instrument's rear panel. • Make sure your TYROS is rated for the AC voltage supplied in the area in which it is to be used (as listed on the rear panel). Connecting the unit to the wrong AC supply can cause serious damage to the internal circuitry and may even pose a shock hazard! 3 Connect the other end of the power cord to an AC outlet. Make sure your TYROS meets the voltage requirement for the country or region in which it is being used. • Use only the AC power cord supplied with the TYROS. If the supplied cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! • The type of AC power cord provided with the TYROS may be different depending on the country in which it is purchased (a third prong may be provided for grounding purposes). Improper connection of the grounding conductor can create the risk of electrical shock. Do NOT modify the plug provided with the TYROS. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use a plug adapter which defeats the grounding conductor. Optional Speaker Since the TYROS has no built-in speakers, you'll need to use an external speaker system - such as the optional TRS-MS01, which is designed specifically for the TYROS. For instructions on installing the TRS-MS01 to the TYROS, see page 160. 20 TYROS Owner's Manual Shown here is the optional L-7S Keyboard Stand. 18