Yamaha Tio1608-D2 Tio1608-D2 Owners Manual - Page 10

7 [QUICK CONFIG FOR TF] Turns Quick Config on and off. Set this switch setting to OFF if Quick Config is not used or multiple mixers are connected via a network. Turn the unit off before changing the [QUICK CONFIG FOR TF] position. If this setting is set while the power is ON, it is not applied in the main unit until the power is switched OFF and ON. See "Connection methods" (page 14) for information about Quick Config. 8 [SYSTEM] Indicate the status of the Tio1608-D2. During normal operation, the green indicator is lit and the red indicator is off. When the unit is turned on, if the green indicator is off and the red indicator is lit or is flashing, an error has occurred. For more information, see "How to read the indicators". (page 17) 9 [SYNC] Indicate the status of the unit's internal Dante clock sync. When the green indicator is lit, the unit is the clock follower, and the clock is in sync. When the green indicator is flashing, the unit is the clock leader. When the unit is turned on, the green indicator should either light or flash; if the indicator is off, an error has occurred. For more information, see "How to read the indicators". (page 17-18) 0 [+48V ACTIVE] Turns the unit's +48 V phantom power on and off. If the [+48V ACTIVE] is off, no phantom power is supplied to the input connectors even if phantom power is turned on for individual inputs. In this case, the [+48V] for individual inputs will still light, even though no phantom power will be supplied. You can change the switch position while the unit is turned on. a Power indicator Indicates whether the unit is turned on or off. b Power switch Turns the unit on and off. NOTICE Rapidly turning the unit on and off in succession can cause it to malfunction. After turning the unit off, wait for about 6 seconds before turning it on again. Device features Tio1608-D2 Owner's Manual - 10 -