Yamaha YAS-105 Owners Manual - Page 13

Playing back audio from a Bluetooth device on the sound bar 1 With the sound bar turned on, press the BLUETOOTH key on the sound bar's remote control to select Bluetooth as the input source. The BLUETOOTH indicator on the top panel flashes. Flashes 2 Turn on the Bluetooth function of the device and then connect. When Bluetooth connection is made correctly, the BLUETOOTH indicator of the sound bar lights up. Using the Bluetooth standby mode The Bluetooth standby mode allows you to turn on (or off) the sound bar automatically, linked with the operation of the Bluetooth device. 1 With the sound bar turned on, hold down the BLUETOOTH STANDBY key on the sound bar's remote control for more than 3 seconds. Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the mode between enabled and disabled. #-6&5005) 45"/%#: Flash 3 times (enabled), flash once (disabled) When the Bluetooth standby mode is enabled and the sound bar is turned off, the D indicator lights up in red (Bluetooth standby). Lights up 3 Play back a song on the device. NOTE • Perform Bluetooth connection with the device and sound bar within 10 meters (33 ft) of each other. • It may be necessary to select "YAS-105 Yamaha" in the Bluetooth device list again, in the event that a connection problem occurs. You may have to change the output setting to output audio to the sound bar, depending on the Bluetooth device you are using. • Adjust the volume level of the Bluetooth device as required. • If a Bluetooth device is already connected to the sound bar, terminate that Bluetooth connection, then connect with the new device. Terminating Bluetooth connection Bluetooth connection is terminated in the following cases. When the Bluetooth connection is terminated with the sound bar turned on, the BLUETOOTH indicator changes from the lit status to the flashing status and the sound bar enters the connection wait status. • The Bluetooth function is turned off on the compatible device. • The BLUETOOTH key on the sound bar's remote control is pressed for more than 3 seconds. • The sound bar is turned off. Lights up (red) Functions available on Bluetooth devices with Bluetooth standby mode enabled Power on interlock function (when the sound bar is turned off) When Bluetooth connection is made on the device, the sound bar will turn on and will be ready to play back sound from the device. Power off interlock function (when the sound bar is turned on) The sound bar will be turned off when Bluetooth connection is terminated on a Bluetooth device. (Only when BLUETOOTH is selected as the input source.) Using the HOME THEATER CONTROLLER application By installing the dedicated free application "HOME THEATER CONTROLLER" to a Bluetooth device, such as a smartphone, you can perform various operations easily and conveniently with the Bluetooth device. (Setting items: basic operation, surround mode, sound adjustments) NOTE • To use the application, connect the sound bar and a Bluetooth device via Bluetooth connection. • If you enable the Bluetooth standby mode of the sound bar, you can turn on the power of the sound bar with the Bluetooth device. For details on "HOME THEATER CONTROLLER", see the product information on our website. En 11