Yamaha YAS-105 Owners Manual - Page 16
Using an external subwoofer, Clearing all programmed functions
View all Yamaha YAS-105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Clearing all programmed functions 1 With the sound bar turned off, hold down the LEARN key on the sound bar's remote control for more than 3 seconds (for entering the learning mode). When the sound bar is in the learning mode, the indicators on the top panel flash as shown below. -&"3/ #-6&5005) 45"/%#: Using an external subwoofer The sound bar has dual built-in subwoofers; however you can connect an external subwoofer when you want to enhance low frequency sound. Connect a subwoofer to the SUBWOOFER OUT jack of the sound bar. Sound is output from both the built-in subwoofers and external subwoofer. 2 Hold down (input) on the rear panel of the sound bar for more than 3 seconds. The corresponding indicator of the learned function turns off and the indicators on the top panel flash as shown below. Pin cable for subwoofer (commercially available) 46#800'&3065 If the clearing is completed, you will hear the bleep sound three times. 3 Press the LEARN key on the sound bar's remote control. Mono input NOTE • Use an external subwoofer with built-in amplifier. 14 En