Yamaha YSP 1100 Owner's Manual - Page 82
Setting the TURN ON VOLUME, Setting the DEMO MODE, TURN ON VOLUME
UPC - 027108926490
View all Yamaha YSP 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
ADJUSTING SYSTEM PARAMETERS Setting the TURN ON VOLUME You can set the initial volume level when the power of this unit is turned on. 6 Press STANDBY/ON on the front panel to set this unit to the standby mode. STANDBY/ON 1 Repeat steps 1 to 3 in "Using the system parameters" on page 76. 2 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 3 Press / on the remote control so that TURN ON VOLUME is shown in the front panel display. The new setting for the maximum volume level will be activated when you turn on the power of this unit next time. Setting the DEMO MODE You can test the beam output from this unit to experience the sound beam. y You can also perform this function simply by pressing INPUT on the front panel. A sound beam is output from this unit when you press and hold INPUT for more than 2 seconds. The sound beam shuttles between left and right twice, and then stops. 1 Repeat steps 1 to 3 in "Using the system parameters" on page 76. ENTER 2 Set the operation mode selector to YSP to switch to the operation mode of this unit. VOL TURN ON VOLUME 4 Press ENTER. TV/AV YSP 3 Press / on the remote control so that DEMO MODE is shown in the front panel display. ENTER ENTER 5 Press / to adjust the initial volume level. ENTER Control range: MAX, 99 to 01, OFF Control step: 1 78 En VOL DEMO MODE