Yamaha YSP 1100 Owner's Manual - Page 99

English :41 QUICK REFERENCE GUIDE This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner's Manual. Installing this unit Decide where to install this unit. Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner. Install this unit in the exact center of the wall when it is measured from the left and right corners. An object, such as furniture Install this unit in the corner at a 40˚ to 50˚ angle from the adjacent walls. An object, such as furniture 40˚ to 50˚ Install this unit either above or under your TV. Please read the following for reference. For further information on installation, see pages 11 and 13 in the Owner's Manual. Make sure you use the supplied fasteners to prevent an accidental fall of this unit (see page 14 in the Owner's Manual). When installing this unit above your TV, place it on the top panel of a commercially available rack as shown below. Make sure that the top panel of the rack is wide and stable enough to support the weight of this unit. When installing this unit under your TV, place it in a TV cabinet as shown below. Make sure that the cabinet is large enough to allow adequate ventilation space around this unit. To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor. Printed in Malaysia WH90290 Connecting external components to this unit Connect external component such as a TV or DVD player to this unit. Connect your TV or DVD player to this unit using appropriate cables as shown below. Connecting a subwoofer enhances bass sound for listening enjoyment. For further information on connecting other components, see pages 15 to 22 in the Owner's Manual. DVD player Coaxial digital output Video output Component video output TV Optical digital output Analog audio output RL Video input Component video input 1 2a 2b 3 4 5 6 COMPONENT COMPONENT COMPONENT RS-232C DVD AUX TV/STB COAXIAL OPTICAL REMOTE IN DIGITAL IN TV/STB VCR AUDIO IN VCR SUBWOOFER DVD/AUX STB VIDEO IN VIDEO OUT Cables used for connections Connect cables in the following order. For the connection 2, use either (a) or (b). If your DVD player has component video output jacks, we suggest using the cable (b). 1 Digital audio pin cable (supplied) $"65*0/ 2a Video pin cable ɾDo not plug the power 2b Component video pin cable 3 Optical cable (supplied) 4 Audio pin cable (supplied) 5 Video pin cable (supplied) 6 Component video pin cable (in case of a component connection) 7 Subwoofer pin cable supply cable into a wall outlet until all connections are complete. ɾUnplug the power supply cable before changing connections, moving or cleaning this unit. (in case you connect a subwoofer) 8 Power supply cable (supplied) Subwoofer y If a subwoofer is connected to this unit, turn on the 7 power of your subwoofer and then carry out the AUTO SETUP procedure (see the backside) or Monaural input select "SWFR" for "BASS OUT" in "SUBWOOFER SET" (see page 67 in the Owner's Manual). This unit 8 To the AC outlet Setting up the listening environment automatically Connect the optimizer microphone to this unit. You can automatically adjust the various channel settings that best match your listening environment using the supplied optimizer microphone. Follow the procedure below to connect the optimizer microphone to this unit and place it in a proper location. Connect the optimizer microphone to the OPTIMIZER MIC jack on the left side of this unit. Cardboard microphone stand (supplied) Assemble the cardboard microphone stand and place the optimizer microphone on the top of the stand. Optimizer microphone (supplied) Set the optimizer microphone at your normal listening position. Use the supplied cardboard microphone stand or a tripod to place the optimizer microphone at the same height as your ears would be when you are seated. Place the optimizer microphone on the extended center line of this unit and 1.8 m (6.0 ft) or more away from it. Also, make sure place the optimizer microphone within 1 m (3.3 ft) upper or lower from the center height of this unit. Optimizer microphone More than 1.8 m (6.0 ft) Within 1 m (3.3 ft) upper or lower from the center Cardboard microphone stand Sofa Center line Optimizer microphone If you have set the optimizer microphone, follow the steps on the backside to start the AUTO SETUP procedure. Continued on the back C2006 All rights reserved.