Yamaha YSP 1100 Owner's Manual - Page 89

■ Setting macros for the TV without the tuning capability 1 Press and hold CODE SET on the remote control and then press one of the input selector buttons to select the input source you want to set macros for. Proceed to step 2 while holding down CODE SET. TV MUTE STB VCR DVD AUX While holding down, press CODE SET TV 2 Press MACRO on the remote control while holding down CODE SET. TV MUTE CODE SET While holding MACRO down, press 3 Press INPUT1 on the remote control. INPUT1 4 Press CH +/- or TV INPUT on the remote control repeatedly so that the screen changes to the display of the input source selected in step 1. CH TV INPUT or 5 Press ENTER on the remote control to confirm the setting. REMOTE CONTROL FEATURES ■ Operating macros 1 Set the operation mode selector to YSP to switch to the operation mode of this unit. TV/AV YSP 2 Press and hold one of the input selector buttons for approximately 2 seconds to select the input source you want to operate macros for. The TV input changes at the same time the input mode changes. STB VCR DVD AUX TV ■ Canceling the macros 1 Press and hold CODE SET on the remote control and then press one of the input selector buttons to select the input source you want to cancel the macros for. Proceed to step 2 while holding down CODE SET. STB VCR DVD AUX TV MUTE While holding down, press TV CODE SET 2 Press MACRO on the remote control while holding down CODE SET. TV MUTE CODE SET While holding MACRO down, press 3 Press ENTER on the remote control to cancel the macros. ENTER ENTER ADVANCED OPERATION English 85 En