Zanussi Z714W43BI User Manual - Page 11

PREPARATION AND ASSEMBLY OF THE CUPBOARD DOOR, Factory pre setting

Get Zanussi Z714W43BI PDF manuals and user guides View all Zanussi Z714W43BI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

1. Remove the screws of the top cover on the rear of the appliance and install the anti-tilting device as shown in the drawing. ~10mm 2. Adjust the anti-tilting device so that the distance from the counter is 10mm. Loosen the nut counterclockwise with a 3mm wrench. Adjust the height and turn the nut clockwise to fix it. PREPARATION AND ASSEMBLY OF THE CUPBOARD DOOR The dimensions of the cupboard door should be: • width min. 595 - max. 598 mm; • thickness 16-22 mm. Factory pre setting The appliance is originally pre set for the assembly of a cupboard door opening from right to left. The best solution would be to screw the upper hinge to the upper hole of the top plate and the lower hinge to the lower hole of the bottom plate. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
1.
Remove the screws of the top cover on the rear of
the appliance and install the anti-tilting device as
shown in the drawing.
~10mm
2.
Adjust the anti-tilting device so that the distance
from the counter is 10mm. Loosen the nut counter-
clockwise with a 3mm wrench. Adjust the height and
turn the nut clockwise to fix it.
PREPARATION AND ASSEMBLY OF THE CUPBOARD DOOR
The dimensions of the cupboard door should be:
•
width min. 595 - max. 598 mm;
•
thickness 16-22 mm.
Factory pre setting
The appliance is originally pre set for the assembly of
a cupboard door opening from right to left.
The best solution would be to screw
the upper hinge to the upper hole of the
top plate and the lower hinge to the
lower hole of the bottom plate.
11