Zanussi Z714W43BI User Manual - Page 29
Zanussi Z714W43BI Manual
View all Zanussi Z714W43BI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
• The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code . Proceed as follows to clean the pump: WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot. Wait until the water cools down 2 1 180˚ 1. Open the pump cover. 2. Place a suitable bowl below the drain pump access to collect the water that flows out. Always keep a rag nearby to dry up any water spillages when removing the filter. 3. Turn the filter 180 degrees in anti-clockwise direction to open it, without removing. Let the water flow out. 4. When the bowl is full of water, turn the filter back and empty the container. 5. Repeat the steps 4 and 5 until the water stops to flow out. 29