Zanussi Z714W43BI User Manual - Page 25

3. Touch the Start/Pause button again to start the new countdown. THE AUTOADJUST SYSTEM LOAD DETECTION After touching the Start/Pause button: 1. The AutoAdjust System starts estimating the weight of the load to calculate the real programme duration. During this phase the two dots separating hours from minutes are blinking 2. After about 15-20 minutes new cycle duration is displayed. The appliance automatically adjusts the programme duration to the load to achieve perfect washing results in the minimum possible time. INTERRUPTING A PROGRAMME AND CHANGING THE OPTIONS When the programme is running, you can change only some options: 1. Touch the Start/Pause button. The related indicator flashes. 2. Change the options. The given information in the display changes accordingly. 3. Touch the button Start/Pause again. The washing programme continues. CANCELLING A RUNNING PROGRAMME 1. Press the button On/Off to cancel the programme and to deactivate the appliance. 2. Press the button On/Off again to activate the appliance. If the AutoAdjust System has completed and the water filling has already started, the new programme starts without repeating the AutoAdjust System. The water and the detergent are not drained out in order to avoid waste. There is also an alternative way of cancelling: 1. Rotate the selector knob to the "Reset" position . 2. Wait for 1 second. The display shows . Now, you can set a new washing programme. OPENING THE DOOR - ADDING GARMENTS If the temperature and level of the water in the drum are too high and/or the drum is still rotating you should not open the door. While a programme or the delay start operates, the appliance door is locked. The display shows the indicator . 1. Touch the Start/Pause button. In the display the related door lock indicator goes off. 2. Open the appliance door. If necessary, add or remove the items. Close the door and touch the Start/Pause button. The programme or the delay start continues. END OF THE PROGRAMME When the programme has finished, the appliance stops automatically. The acoustic signals operate (if they are active). The display shows The indicator of the Start/Pause off. button goes The door unlocks and the indicator goes off. 1. Press button On/Off to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. When you activate the appliance again, the display shows the end of the previous programme. Turn the programme dial to set a new cycle. 2. Remove the laundry from the appliance. 3. Make sure that the drum is empty. 4. Keep the door and the detergent dispenser slightly ajar to prevent mildew and odours. 5. Close the water tap. DRAINING WATER OUT AFTER END OF CYCLE If you have chosen a programme or an option that does not empty out the water of the last rinse, the programme is completed, but: • The time area shows and the display shows the door locked . • The indicator of the Start/Pause button starts flashing. • The drum still turns at regular intervals to prevent creases in the laundry. 25