Zanussi Z714W43BI User Manual - Page 8
The inlet hose, WARNING, Water drainage
View all Zanussi Z714W43BI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
The inlet hose 45O 20O 1. Remove the inlet hose from inside the drum. 2. To connect the water inlet hose towards the proper direction and with the proper inclination, check the position of the water tap before connecting it to the back of the appliance. Make sure the hose is nor kinked, squashed but neither tensed. 3. Connect the hose to the back of the appliance. Do not turn the inlet hose downwards, but turn it left or right depending on the position of your water tap. 4. Loosen the ring nut to fix it in the correct position. 5. Connect the water inlet hose to the cold water tap with 3/4 thread. WARNING! Make sure that there are no leaks from the couplings. Use the hose supplied with appliance. Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service Centre for an inlet hose replacement. Water drainage The drain hose can be connected: 8