Zanussi Z714W43BI User Manual - Page 14

Product Description

Page 14 highlights

1 N 2 ED C PRODUCT DESCRIPTION APPLIANCE OVERVIEW 12 3 Counter-magnet The appliance is pre set for a magnetic closure. For a correct closure: 1. Position the screw C and the counter-magnet D on the magnetic plate N. Lean the cupboard door against the screw until it leaves a mark. 2. Open the cupboard door and screw the counter-magnet D (steel disk + rubber ring E) with the screw C in the inner side of the cupboard door, where the screw left the mark as described in the first step. 10 11 12 1 Hinge supports 2 Detergent dispenser 3 Control panel 4 Magnetic plate 5 Door handle 6 Rating plate 7 Plate with rubber beater 4 5 6 7 8 9 13 8 Drain pump filter 9 Front feet for levelling the appliance 10 Drain hose 11 Mains cable 12 Inlet hose connection 13 Back feet for levelling the appliance 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

2
N
1
E
D
C
Counter-magnet
The appliance is pre set for a magnetic closure.
For a correct closure:
1.
Position the screw
C
and the counter-magnet
D
on the magnetic plate
N
. Lean the cupboard
door against the screw until it leaves a mark.
2.
Open the cupboard door and screw the coun-
ter-magnet
D
(steel disk + rubber ring
E
) with
the screw
C
in the inner side of the cupboard
door, where the screw left the mark as descri-
bed in the first step.
PRODUCT DESCRIPTION
APPLIANCE OVERVIEW
10
11
12
13
2
1
3
5
4
7
6
8
9
1
Hinge supports
2
Detergent dispenser
3
Control panel
4
Magnetic plate
5
Door handle
6
Rating plate
7
Plate with rubber beater
8
Drain pump filter
9
Front feet for levelling the appliance
10
Drain hose
11
Mains cable
12
Inlet hose connection
13
Back feet for levelling the appliance
14