Zanussi Z714W43BI User Manual - Page 23
Before First Use, Daily Use
View all Zanussi Z714W43BI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
BEFORE FIRST USE 1. Make sure that the electrical power is available and the water tap is open. 2. Pour 2 litres of water into the detergent compartment marked by . This action activates the drain system. 3. Pour a small quantity of detergent into the compartment marked by . DAILY USE 4. Set and start a programme for cotton at the highest temperature without any laundry in the drum. This removes all possible dirt from the drum and the tub. WARNING! Refer to Safety chapters. FILLING THE DETERGENT AND ADDITIVES ACTIVATING THE APPLIANCE 1. Connect the mains plug to the mains socket. 2. Open the water tap. 3. Press the On/Off button for a few seconds to activate the appliance. A short tune sounds. LOADING THE LAUNDRY 1. Open the appliance door. 2. Shake the items before you put them in the appliance. 3. Put the laundry in the drum, one item at a time. Do not put too much laundry in the drum. 4. Close the door firmly. CAUTION! Make sure that no laundry gets caught between the seal and the door to avoid risk of water leakage and damage to the laundry. Washing heavily oiled, greasy stains could cause damage to rubber parts of the washing machine. - Compartment for prewash phase, soak programme or stain remover. - Compartment for washing phase. - Compartment for fabric softener and other liquid treatments(fabric conditioner, starch). - Maximum level for quantity of liquid additives. - Flap for powder or liquid detergent. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). This quantity will however guarantee the best washing results. After a washing cycle, if necessary, remove any detergent residue from the detergent dispenser. 23