Zenith 615 Owner's Manual (English) - Page 35
Troubleshooting
UPC - 719192170025
View all Zenith 615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Reference Troubleshooting Symptom Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. • The battery is discharged. • Recharge the battery. No picture on the LCD or TV (including video from another unit). No sound. The DVD player does not start playback. • The video cable is not connected securely. • Connect the video cable into the jacks securely. • LCD mode is set to OFF. • Select a LCD mode other than OFF. • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV so the picture from the DVD player appears on the screen. • The equipment connected with the audio cable is not • Select the correct input mode of the audio receiver so set to receive DVD signal output. you can listen to the sound from the DVD player. • The audio cables are not connected securely. • Connect the audio cable into the jacks securely. • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type, color system and Regional code.) • The Rating level is set. No response when buttons • Some discs prohibit certain operations. are pressed. • Cancel the Rating function or change the rating level. • " " may appear on the screen during operation. The Remote Control does • The Remote Control is too far from the not work properly. DVD player. • Operate the Remote Control within about 23 ft (7 m). 35