Zenith SL-5610-WH-B User Guide - Page 2

INSTALLATION For best performance, mount the fixture about 7ft (2.1 m) above the ground. ❒ Turn the power to the lighting circuit off at the fuse or circuit breaker box. ❒ Remove the existing light fixture. ❒ Install the mounting strap into the junction box. Orientation of the strap may be different. ❒ Strip about 5/8 in. (15 mm) insulation off of the existing junction box wiring. ❒ Connect the white (neutral) junction box wire to the white Entryway Light wire.Twist the wires together and secure with a wire connector. ❒ Caulk the back edge of the light and mounting surface with silicone weather sealant. ❒ Install a 60 Watt maximum light bulb into the lamp holder. Do not overtighten. Higher wattages will void warranty. Holding Screw for Globe or Jar ❒ Loosen the front holding screw so the globe or jar cover can be installed. Secure by tightening the screw. Do not overtighten. ❒ Connect the green or bare (ground) mounting strap wire to a grounded wire or to a grounded metal box. ❒ Connect the black (hot) junction box wire to the black Entryway Light wire. ❒ Install the mounting stem into the strap so that it extends out about 3/4 in. (19 mm). ❒ Install the fixture over the mounting stem. ❒ Install and tighten the mounting stem nut.  595-5498-09