ZyXEL GS1500-24P User Guide - Page 48
Setting Port VID
View all ZyXEL GS1500-24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 5 Initial Setup Example 1 Click Configuration > VLAN > Static VLAN in the navigation panel and the following screen will display. 2 In the Static VLAN screen, enter 2 in the VLAN ID field and enter a descriptive name in the VLAN Name field for the VLAN group. 3 Since the VLAN2 network is connected to port 1 on the Switch, select Untagged on port 1 to make it a permanent member of the VLAN2 group only. 4 To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly, make sure Untagged is selected as above so the Switch removes VLAN tags before sending. 5 Click Add / Modify to save the settings to the run-time memory. Settings in the run-time memory are lost when the Switch's power is turned off. 5.1.2 Setting Port VID Use PVID to add a tag to incoming untagged frames received on that port so that the frames are forwarded to the VLAN group that the tag defines. 48 GS1500-24P User's Guide