ZyXEL MES-3528 User Guide - Page 253
PPPoE IA for VLAN
View all ZyXEL MES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
Chapter 28 PPPoE Table 87 Advanced Application > PPPoE Intermediate Agent > Port > VLAN LABEL Circuit-id DESCRIPTION Enter a string of up to 63 ASCII characters that the Switch adds into the Agent Circuit ID sub-option for this VLAN on the specified port. Spaces are allowed. Remote-id The Circuit ID you configure here has the highest priority. Enter a string of up to 63 ASCII characters that the Switch adds into the Agent Remote ID sub-option for this VLAN on the specified port. Spaces are allowed. If you do not specify a string here or in the Remote-id field for a specific port, the Switch automatically uses the PPPoE client's MAC address. Apply Cancel The Remote ID you configure here has the highest priority. Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the nonvolatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. 28.3.3 PPPoE IA for VLAN Use this screen to set whether the PPPoE Intermediate Agent is enabled on a VLAN and whether the Switch appends the Circuit ID and/or Remote ID to PPPoE discovery packets from a specific VLAN. Click the VLAN link in the Intermediate Agent screen to display the screen as shown. Figure 141 Advanced Application > PPPoE Intermediate Agent > VLAN MES-3528 User's Guide 253