ZyXEL MES-3528 User Guide - Page 70
Port Status Summary
View all ZyXEL MES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 7 System Status and Port Statistics 7.2 Port Status Summary To view the port statistics, click Status in all web configurator screens to display the Status screen as shown next. Figure 40 Status The following table describes the labels in this screen. Table 6 Status LABEL Port Name Link State DESCRIPTION This identifies the Ethernet port. Click a port number to display the Port Details screen (refer to Figure 41 on page 71). This is the name you assigned to this port in the Basic Setting > Port Setup screen. This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for 1000Mbps) and the duplex (F for full duplex or H for half). It also shows the cable type (Copper or Fiber) for the combo ports. If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port (see Section 13.1 on page 117 for more information). LACP TxPkts RxPkts Errors Tx KB/s If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays STOP. This fields displays whether LACP (Link Aggregation Control Protocol) has been enabled on the port. This field shows the number of transmitted frames on this port. This field shows the number of received frames on this port. This field shows the number of received errors on this port. This field shows the number of kilobytes per second transmitted on this port. 70 MES-3528 User's Guide