ZyXEL PLA4201 User Guide - Page 20
The RESET/ENCRYPT Button, PLA4201 v2 User's Guide - no power light
View all ZyXEL PLA4201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 3 The RESET/ENCRYPT Button For example, you have already set up a powerline network in your home (A) which accesses a printer (B). Now you want a separate powerline network connection from your laptop to your printer (C). Figure 9 One Existing Powerline Network A C B 1 Click the RESET/ENCRYPT button on (A) for 5 to 8 seconds and then release it. This disconnects (A) from (B). 2 Click the RESET/ENCRYPT button on (A) and (C) for 0.5 to 3 seconds and within two minutes of each other. 3 Wait for about one minute while (A) and (C) connect. 4 Check the LEDs on both (A) and (C). When the power ( ) and HomePlug ( ) lights stop blinking and the power ( ) light shines steadily, the devices are connected. Figure 10 Two Separate Powerline Networks B A C 20 PLA4201 v2 User's Guide