2012 Acura MDX Owner's Manual - Page 176

Driving Position Memory System MEMORY BUTTONS Doing any of the following after pressing the MEMO button will cancel the storing procedure. ● Selecting a Memorized Position To select a memorized position, do this: 1. Make sure the vehicle is parked. 2. Press the desired memory button (1 or 2) until you hear a beep, then release the button. The system will move the seat, steering wheel, and outside mirrors to the memorized positions. The indicator in the selected memory button will flash during movement. When the adjustments are complete, you will hear two beeps, and the indicator will remain on. To change the ''MEMORY POSITION LINK'' setting, see page 108. Instruments and Controls Not pressing a memory button within 5 seconds. Readjusting the seat position. Readjusting the outside mirror position. ● ● MEMO BUTTON 3. Press and release the MEMO button on the control panel. You will hear a beep. Immediately press and hold one of the memory buttons (1 or 2) until you hear two beeps. The indicator in the memory button will come on. The current positions of the driver's seat, steering wheel, and outside mirrors are now stored. Each memory button stores only one driving position. Storing a new position erases the previous setting stored in that button's memory. If you want to add a new position while retaining the current one, use the other memory button. CONTINUED 169