2012 Acura MDX Owner's Manual - Page 97

Multi-Information Display Customize Settings If you turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position, or move the shift lever out of Park, the display will change to the normal screen. You can customize some vehicle control settings for ''DRIVER 1'' and ''DRIVER 2'' separately. If ''DRIVER 1'' or ''DRIVER 2'' is not displayed, customizing is not possible. To have the driver's ID detected, make sure your remote transmitter is linked to the system (see Keyless Memory Settings™ on page 148). If you want the settings as they were when the vehicle left the factory, select DEFAULT ALL, as described on page 93. If you want to change any vehicle control settings, select CHG SETTING, then press the SEL/ RESET button. Refer to the table on the following pages about the settings you want to customize. When the main menu displays ''Keyless Memory Settings™,'' you can customize some vehicle control settings. To enter the customizing mode, press the SEL/RESET button. To change the settings, the ignition switch must be in the ON (II) position, and the vehicle must be stopped with the transmission in Park. 90