2012 Acura MDX Owner's Manual - Page 201

Playing the AM/FM Radio (Models without navigation system) To Play the Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the VOL/ knob or the AM or FM button. Adjust the volume by turning the VOL/ knob. The band and frequency that the radio was last tuned to are displayed. To change bands, press the AM or FM button. On the FM band, ST will be displayed if the station is broadcasting in stereo. Stereo reproduction in AM is not available. To Select a Station You can use any of five methods to find radio stations on the selected band: tune, skip(seek), scan, the preset buttons, and auto select. TUNE － Use the TUNE knob to tune the radio to a desired frequency. Turn the knob right to tune to a higher frequency, or left to tune to a lower frequency. SKIP(SEEK) － The skip(seek) function searches up and down from the current frequency to find a station with a strong signal. To activate it, press and hold the or side of the button, then release it. SCAN － The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds. If you do nothing, the system will scan for the next strong station and play it for 10 seconds. When it plays a station that you want to listen to, press the SCAN button again. 194