2012 Acura MDX Owner's Manual - Page 535
2012 Acura MDX Manual
Page 535 highlights
Lights HOLDING CLIP CAP BULB 5. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 6. Push the electrical connector onto the new bulb. 7. Turn on the headlights to test the new bulb. ENGINE COOLANT RESERVOIR CONNECTOR (Passenger's side) Use a flat-tip screwdriver to remove the holding clip from the engine coolant reserve tank, and then remove the engine coolant reserve tank. Remove the cap from the engine coolant reserve tank (use towel to wipe fluid). Unclip hose from the stay brackets on the engine coolant reserve tank. 3. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 4. Remove the bulb by turning it about one-quarter turn counterclockwise. 8. (Passenger's side) Install the engine coolant reserve tank and power steering reserve tank. 528