2010 BMW 528 Owner's Manual - Page 103

3. "Welcome light" Activating/deactivating daytime running lamps* iDrive, for operating principle refer to page 16. 1. "Settings" 2. "Lighting" 3. "Daytime running lamps" The welcome lamps are switched on. Driving tips Reference Mobility Communications Entertainment Navigation The setting is stored for the remote control currently in use. Pathway lighting If you activate the headlamp flasher after switching off the ignition with the lamps switched off, the low beams come on and remain on for a certain time. You can set the duration or deactivate the function via iDrive. iDrive, for operating principle refer to page 16. 1. "Settings" 2. "Lighting" 3. "Pathway lighting:" 4. Set or deactivate the duration. The daytime running lamps are switched on. The setting is stored for the remote control currently in use. Adaptive Light Control* The concept Adaptive Light Control is a variable headlamp control system that enables better illumination of the road surface. Depending on the steering angle and other parameters, the light from the headlamp follows the course of the road. In tight curves at speeds up to approx. 45 mph/ 70 km/h, e.g. on mountainous roads or when negotiating curves, turning lamps are switched on that light up the inside area of the curve. The setting is stored for the remote control currently in use. Activating Adaptive Light Control With the ignition switched on, turn the light switch into position 3, refer to page 100. The turning lamps are automatically switched on depending on the steering angle or the use of turn signals. To avoid blinding oncoming traffic, the Adaptive Light Control directs light towards the front passenger side when the vehicle is at a standstill. When driving in reverse, only the turning Daytime running lamps* The daytime running lamps light up in positions 0, 1 and 3. If the light switch remains in position 1, the parking lamps light up after the ignition is switched off. 101 Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG Controls At a glance