2010 BMW 528 Owner's Manual - Page 226
2010 BMW 528 Manual
Page 226 highlights
Replacing components 1. Remove the sealing cap, refer to Access to lamps. 2. Push the locking bar to the side out of the anchor and fold upward. 1. Press back against the front edge of the lamp with the tip of your finger, then pivot it out. 2. Turn the bulb holder to the left and remove. 3. Remove the connector and take out the bulb. 4. Replace the bulb and reinstall. 5. Fold down the locking bar and engage it. 6. Reconnect the connector. 7. Mount the sealing cap. Watch the markings on the bulb when doing so. 3. Remove the bulb for replacement. Side marker lamps, front and rear To replace, please go to your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Turn signals, front 21-watt bulb, PY21W 1. Turn the bulb holder to the left and remove. Tail lamps Sedan > Turn signals 1, tail lamps 6 and side marker lamps 7 are designed using LED technology. In the event of a malfunction, please go to your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. > Backup lamps: 16-watt bulb, W16W > Other lamps: 21-watt bulb, P21W 2. Apply gentle pressure to the bulb while turning it to the left for removal and replacement. Side-mounted turn signals 5-watt bulb, W5W 1 2 3 Turn signal Tail lamp and brake lamp Backup lamp 224 Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG