2010 BMW 528 Owner's Manual - Page 48
2010 BMW 528 Manual
Page 48 highlights
Adjusting The adjustment of the lumbar support is not stored in the memory. Storing 1. Switch on radio readiness or ignition, refer to page 57. 2. Set the desired seat, exterior mirror and steering wheel positions. 3. Press the button: The LED in the button lights up. 4. Press the desired memory button 1 or 2: The LED goes out. When using this feature, always make sure that the footwell behind the driver's seat is empty and unobstructed. Failure to do so could cause injury to persons or damage to objects behind the seat as a result of a rearward movement of the seat.< The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. Selecting automatic call-up iDrive, for operating principle refer to page 16. 1. "Settings" 2. "Door locks" 3. "Last seat position auto." Requesting Do not request a position from the memory while the vehicle is moving. There is a risk of accident from unexpected movement of the seat or steering wheel.< Comfort mode 1. Open the driver's door after unlocking or switch on radio readiness. 2. Briefly press the desired memory button 1 or 2. The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. The function for automatically calling up the last seat position is switched on and is stored for the remote control currently in use. Safety feature 1. Close the driver's door and switch the ignition on or off. 2. Press the desired memory button 1 or 2 and keep it pressed until the adjustment process has been completed. If the button was pressed inadvertently: press the button again; the LED goes out. Switching off automatic call-up Deactivate "Last seat position auto.". Head restraints A correctly adjusted head restraint reduces the risk of spinal injury in the event of an accident. Adjust the head restraint so that its center is approximately at ear level. Otherwise there is increased danger of injury in the event of an accident. Only remove the head restraints if no one will be sitting on the seat in question. Reinstall the head restraints before transporting passengers, as otherwise the head restraint cannot provide its protective function.< Requesting with remote control The last positions of the driver's seat, the exterior rearview mirrors, and steering wheel are stored for the remote control currently in use. You can choose when the position is requested: > Request when unlocking vehicle > Request when opening driver's door 46 Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG