2010 BMW 528 Owner's Manual - Page 120

Practical interior accessories Partition net 3. Pull the casing out backwards, arrow 2, without tilting it. Do not allow the partition net to snap back, otherwise there is a risk of injury and the partition net may be damaged.< 4. Push the case into the guides on the backs of the backrests. 5. Carefully pull out the partition net and insert it in the front brackets as described in With normal cargo bay. This is best carried out from the front seat. To restore the original state, proceed in the reverse order. Finally, lay the case in the two side brackets and then press forward until it engages. The red warning indicator disappears in the recess when the catch is engaged. Check whether the case is properly locked in place by pulling it with a sudden movement. With normal cargo bay Pull the partition net out of the case by the loop. Grip the bar on both ends and insert it into the retaining fixtures, arrow 1. This is best carried out from the rear seat. When you no longer require the partition net, grip both ends of the bar and take it out of the retaining fixtures, arrow 2. Then slowly allow the partition net to glide into the case. With an expanded cargo bay 1. Fold down both rear backrests, refer to Expanding cargo bay. 2. Use the buttons to unlatch the casing on both sides, arrow 1. Compartment in floor Automatic luggage compartment roller cover: the opened floor panel strikes against the luggage compartment roller cover in the end position. If necessary, unhook the luggage compartment roller cover at the rear before opening the floor panel. To open, reach into the recess and swing up the handle. The floor panel flap can be locked. 118 Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG