2010 BMW 528 Owner's Manual - Page 83
2010 BMW 528 Manual
Page 83 highlights
Displaying stored Check Control messages 1. Press the button longer: The first stored message is displayed. > when you press the CHECK button again for approx. 2 seconds Speed limit You can enter a speed and a Check Control message indicates when you have reached this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area. You are only warned of reaching this speed a second time if your vehicle speed falls below it again by at least 3 mph/5 km/h. 2. Press the button: When the button is pressed again, a different message is displayed. Displaying, setting or changing limit iDrive, for operating principle refer to page 16. 1. "Settings" 2. "Limit" Via iDrive iDrive, for operating principle refer to page 16. 1. "Vehicle Info" 2. "Vehicle status" 3. "Check Control" 4. Turn the controller until the desired limit is displayed. 5. Press the controller. 4. Select the text message. The speed limit is stored. Displays after completion of trip Malfunction reports generated during the trip are shown consecutively when you switch off the ignition. Before the display disappears, you can display the messages once again. Press the CHECK button for approx. 2 seconds. If several messages are present, you can continue to press the CHECK button to view them in succession. The display goes out > after a short time Applying your current speed as limit iDrive, for operating principle refer to page 16. 1. "Settings" 2. "Limit" 81 Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG Reference Mobility Communications Entertainment Navigation 3. "Limit:" Driving tips Controls At a glance