2010 BMW M5 Owner's Manual - Page 217
2010 BMW M5 Manual
Page 217 highlights
Coolant Do not add coolant to the cooling system when the engine is hot. Escaping coolant can cause burns.< Coolant is composed of equal parts water and a coolant additive. Not all commercially available additives are suitable for your BMW. Ask your BMW center for suitable additives. Only use suitable additives, otherwise engine damage may result. The additives present a health hazard; observe the instructions on the containers.< Comply with the appropriate environmental protection regulations when disposing of coolant additives.< Checking coolant level 1. Do not open the hood until the engine has cooled down. 2. Turn the cap of the expansion tank counterclockwise to allow any accumulated pressure to escape, then continue turning to open. 3. The coolant level is correct when the upper end of the float rod is at the same height as the upper edge of the filler neck, also refer to the drawing next to the filler neck. 4. If the coolant is low, slowly add coolant up to the specified level - do not overfill. 6. Have the reason for the coolant loss eliminated as soon as possible. Mobility 215 Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG 5. Turn the cap until there is an audible click. Reference Communications Entertainment Navigation Driving tips Controls At a glance