2010 BMW M5 Owner's Manual - Page 51

the Control Display with buttons 2 and 3. The maximum temperature is supplied when three LEDs are lit. The temperature is reduced and if need be, the heating is switched off in order to reduce the load on the battery. The LEDs remain lit. To switch off: Press button longer. 3. Select "Driver's seat climate" or "Passenger's seat climate" and press the controller. Temperature distribution without active seat ventilation The heat output can be distributed variously in the seat cushion and the backrest. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Move the controller to the left to open "Climate". 3. Select "Seat heater distribution" and press the controller. Turn the controller to adjust the distribution. The setting is applied. Rear Operation similar to front seat heating; two temperature levels, without temperature distribution. Active seat ventilation* 5. Turn the controller to adjust the distribution. The setting is applied. The appearance and arrangement of the buttons may vary depending on the equipment. Temperature distribution with active seat ventilation The heat output can be distributed variously in the seat cushion and the backrest. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Move the controller to the left to open "Climate". 1 2 Active seat ventilation Active seat ventilation with seat heating 49 Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG Reference Mobility Communications Entertainment Navigation 4. Move the controller to the left or right to select "Driver" or "Passenger". Driving tips Controls At a glance