2010 BMW M5 Owner's Manual - Page 228

Replacing components The M Mobility System consists of Model with pressure gauge integrated in housing* 1 2 Sealant bottle and sticker with speed limit Filling hose from sealant bottle to wheel 3 4 5 6 7 8 9 Connector and cable for lighter socket Mounting for sealing bottle Compressor On/Off switch Pressure gauge for indicating tire inflation pressure Button for reducing tire inflation pressure Connecting hose for connecting compressor and sealant bottle or compressor and wheel Model with pressure gauge on hose* 3 4 5 6 7 8 9 Connector and cable for lighter socket Mounting for sealing bottle Compressor On/Off switch Pressure gauge for indicating tire inflation pressure Screw on pressure gauge for reducing tire inflation pressure Connecting hose for connecting compressor and sealant bottle or compressor and wheel Connector, cable and connecting hose are stored on underside of compressor. Using M Mobility System To repair a flat tire with the M Mobility System, proceed as follows: > Fill sealant into wheel, refer to page 226. > Distribute sealant, refer to page 227. > Produce tire inflation pressure, refer to page 227. Filling sealant into wheel Strictly comply with the specified order, otherwise highly pressurized sealant could escape.< 1. Shake sealant bottle. 2. Screw hose 9 onto connection of sealant bottle. 3. For model with pressure gauge on hose: Make sure that screw 8 on pressure gauge is closed. Connector, cable and connecting hose are stored in the compressor housing. 226 Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG