2010 BMW M5 Owner's Manual - Page 55

3. Select "MDrive" and press the controller. 5. Press the controller. 6. Turn the controller to select the desired setting. The functions contained in MDrive are displayed: > "SMG Drivelogic" Sequential Manual Transmission with Drivelogic: shifting modes and Drivelogic driving programs, refer to page 62 > "EDC" Programs of the Electronic Damping Control, refer to page 83 > "DSC" Dynamic Stability Control and M Dynamic Mode, refer to page 81 > "POWER" Programs of the M Engine Dynamics Control, refer to page 59 > "Backrest"* Programs of the active backrest width adjustment, refer to page 44 > "Head-Up Display"* Views of the Head-Up Display, refer to page 90 You can reset all settings for MDrive to the default values: > "Reset to default" 4. Select the desired function. "Unchanged" retains the current setting made outside of MDrive. 7. Press the controller. The setting is stored for the remote control currently in use. Driving tips Reference Mobility 53 Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG Press the button on the steering wheel. Pressing the button again deactivates MDrive. If the indicator lamp flashes after the button was pressed, MDrive was unable to respond because the ABS Antilock Brake System or DSC Dynamic Stability Control are currently regulating driving stability. Press the button again when the indicator lamp no longer flashes.< Even with MDrive activated, you can change individual settings outside MDrive, e.g. with the buttons in the center console. To reactivate all settings made for MDrive on the Control Display: press the button twice. Communications Entertainment The indicator lamp in the instrument cluster lights up. The settings made on the Control Display for the functions contained in MDrive are active. Navigation Activating settings Controls At a glance