1996 Chevrolet Suburban Owner's Manual - Page 403

Maintenance Schedule I Duty Emissions - Gasoline Engines Heavy (Continued) 0 Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking.** I DATE I ACTUALMILEAGE I SERVICED BY: I 24,000 Miles (40000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 0 Lubricate the front suspension, king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines, front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperature is 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication or they could be damaged. Perform each of the listed lubrication service items at this mileage interval (or every 12 months, whichever occurs first). 0 Check readfront axle fluidlevel and add fluid as needed. Check constant velocity joints and axle seals for leaking.** 0 Replace air cleaner filter. Replace filter more often under dusty conditions. An Emission Control Service. 0 For 2-Wheel Drive vehicles only: Clean and repack the front wheel bearings (or at each brake relining, whichever occurs first). 0 Replace fuel filter. Replace filter sooner if it is clogged.? (Continued) 7-40