1996 Chevrolet Suburban Owner's Manual - Page 430
1996 Chevrolet Suburban Manual
Page 430 highlights
I Maintenance Schedule I - Diesel Engines (Continued) I Check the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fastenersand other components are tight. Also check to be sure that the air cleaner housing is properly seated, the cover fits tightly and the wing nuts are tight. Tighten connections and fasteners orreplace damaged parts as necessary. This is a Noise Emission Control Service. Applicable only to vehicles sold in the United States. inspect all 0 If your engine has a thermostatically controlled cooling fan, hoses and ducts for proper hook-up (or every 12 months, whichever occurs first).Be sure the valve works properly. This is a Noise Emission Control Service. Applicable only to vehicles sold in the United States. Check readfront axle fluid level and add fluid as needed. Check constant velocity joints and axle seals for leaking. ** DATE ACTUAL MILEAGE SERVICED BY: 22,500 Miles ( 3 6 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. 0 Lubricate the front suspension,king pin bushings, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides,rear driveline center splines, front axle propshaft splines, brake pedal springs and clutch pedal springs. Ball joints and king pin bushings should not be lubricated unless their temperatureis 10" F (-12" C), or higher. When weather is cold, let the ball joints and king pin bushings warm up before lubrication orthey could be damaged. Perform each of the listed lubrication serviceitems at this mileage interval (or every12 months, whichever occurs first). Rotate tires. See"Tire Inspection and Rotation" in the Index for proper rotation pattern and additional information. See "Tires" in the Index. DATE ACTUAL MILEAGE SERVICED B Y