1998 Chevrolet Lumina Owner's Manual - Page 260

How to Add Fluid Refer to the Maintenance Schedule determine what to kind of transaxle fluidto use. See "Recommended Fluids and Lubricants" the Index. in If the fluid levelis low, add only enough the proper of fluid to bring the level the cross-hatched area on into the dipstick. 3. After adding fluid, recheck the fluidlevel as described under "How to Check." 4. When the correct fluid level obtained, pushthe is dipstick backin all the way. Engine Coolant The cooling s stem in your vehicle is filled with DEX-COOL engine coolant. This coolant is designed to remainin your vehicle for 5 years or 150,000 miles (240 000 km) whichever occurs first, if you add only DEX-COOL' extended life coolant. 8 1. Pull out the dipstick. 2. Using a long-neck funnel, add enough fluid the at dipstick hole to bring to the proper level. it It doesn't take much fluid, generally less than one pint (0.5 L). Don't ove$ZZ. The following explains your cooling system and how to add when coolant it is low. If you with have problem a if to engine overheating or you need to add coolant your radiator, see "Engine Overheating" inthe Index. NOTICE: I will: We recommend you use only fluid labeled DEXRON@-111, because fluid with that label is madeespecially for yourautomatictransaxle. Damage-causedbyfluidotherthanDEXRON-111 is not covered by your new vehicle warranty. I A 50/50 mixture of water and DEX-COOL@ coolant 0 0 0 Give freezing protection down to -34°F (-37°C). Give boilingprotectionupto 265 "F (129 "C). Protectagainstrustandcorrosion. Help keep the proper engine temperature. Let the warning lights and gages work as they should. 0 0 6-22