2003 Chevrolet Venture Owner's Manual - Page 174

Entering Programming Mode To program features, your vehicle must be in the programming mode. Follow these steps: Delayed Illumination and Exit Lighting This feature allows you to customize the interior lamps when entering and exiting the vehicle. 1. The content theft-deterrent system must be disarmed. See Content Theft-Deterrent on page 2-27. 2. Remove the BCM PRGRM fuse from the instrument panel fuse block, located to the right of the glove box. See Fuses and Circuit Breakers on page 5-95. Programmable Modes Mode 1: Both Features Off (The interior lamps will turn on or off at the same instant that a door is opened or closed.) Mode 2: Delayed Illumination Only (The interior lamps will stay on for about 25 seconds after all the doors and liftgate are closed, or until you lock the doors.) Mode 3: Exit Lighting Only (The interior lamps will come on whenever you remove the key from the ignition and stay on for about 25 seconds, or until you lock the doors.) Mode 4: Both Features On (This combines hM-AP..IVlUUzIJ 3. Close the driver's door. 4. Turn the ignition key to ACCESSORY. 5. Count the number of chimes you hear. You will hear two to four chimes depending onthe features your vehicle is equipped with. Refer to the chart shown previously. You can now program your choices. To exit the programming mode, follow the steps listed mder Exiting Programming Mode on page 2-71. r) L UI IU nnA 9 \ "., 2-63