2010 Chevrolet Equinox Owner's Manual - Page 31

Seats and Restraints To save: 1. Adjust the driver seat, including the seatback recliner, and both outside mirrors, to a comfortable position. 2. Press and hold the MEM button and button 1 at the same time until a beep indicates the position is stored. A second seating and mirror position can be programmed by repeating the above steps and pressing button 2. To recall the memory positions, the vehicle must be in P (Park). Press and hold either button 1 or button 2 corresponding to the desired driving position. The seat, outside mirrors and pedals, if available move to the stored position. Releasing the button before the stored position is reached cancels the recall. Entry using the Remote Keyless Entry (RKE) transmitter with the remote recall feature on automatically adjusts the seat and mirrors. There is no adjustment when the position has not been changed by another seating position. When the remote recall feature is on, the seat and mirror position will be stored when the ignition is turned to LOCK/OFF. It is stored according to the RKE transmitter used to start the vehicle. To stop recall movement of the RKE remote recall feature, press one of the power seat controls, memory buttons, or power mirror buttons. 2-5 Memory Seat recall may stop if the seat is blocked. Remove the obstruction and then press the memory button again. If the memory function does not work properly, see your dealer/retailer for service. Easy Exit Seat If the easy exit seat feature is on in the Driver Information Center (DIC), automatic adjustment occurs when the ignition is turned to LOCK/OFF and the driver door is opened. The driver seat moves back. See Vehicle Personalization on page 4‑39 for more information.