2010 Chevrolet Equinox Owner's Manual - Page 312

9-34 Vehicle Care To replace: 1. Turn the tire to reach the access port cap located on front of wheel well cover. 3. If replacing low/high headlamp bulb, remove the dust cover cap from the back of the headlamp housing by turning the cap counterclockwise. 4. Turn the bulb socket counterclockwise to remove from lamp assembly. 5. Remove the bulb from the socket or disconnect bulb assembly from harness connector. 6. Install new bulb. 7. Reinstall the lamp socket to lamp assembly turning clockwise. 8. Replace the dust cover cap on headlamps. 9. Reinstall the wheel well cover access port cap and secure by installing screw. Headlamps, Front Turn Signal, Sidemarker, and Parking Lamps A. Low Beam Headlamp B. High Beam headlamp C. Park/Turn Signal Lamp D. Side Marker Lamp A. Screw B. Access Port Cap 2. Remove screw (A) and turn access port cap (B) counterclockwise to remove.