2011 Chevrolet Tahoe Owner's Manual - Page 423

Vehicle Care 5. Pull the old bulb straight out from the bulb socket. 6. Press a new bulb into the bulb socket and install the socket into the taillamp assembly by turning it clockwise. 7. Reinstall the taillamp assembly. When reinstalling, make sure to line up the pins on the taillamp assembly with the vehicle. If this is not done, the taillamp assembly will not be able to be installed correctly. 1. Remove the two screws holding each of the license plate lamps to the molding that is part of the liftgate. 2. Twist and pull the license plate lamp assembly forward through the molding opening. 3. Remove the bulb socket from the lamp assembly by turning it counterclockwise. 10-39 License Plate Lamp 4. Pull the bulb straight out of the socket and install the new bulb. 5. Reverse Steps 1 through 3 to reinstall the license plate lamp. Replacement Bulbs If the vehicle is a hybrid, see the hybrid supplement for more information. Exterior Lamp Back-up Lamp License Plate Lamp Rear Turn Signal Lamp, Taillamp, and Stoplamp Side Marker Lamp Bulb Number 7441 W5WLL 3057K 194 For replacement bulbs not listed here, contact your dealer.