2011 Chevrolet Tahoe Owner's Manual - Page 464
2011 Chevrolet Tahoe Manual
Page 464 highlights
10-80 Vehicle Care WARNING (Continued) be tightened with a torque wrench to the proper torque specification after replacing. Follow the torque specification supplied by the aftermarket manufacturer when using accessory locking wheel nuts. See Capacities and Specifications on page 12‑2 for original equipment wheel nut torque specifications. Notice: Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper torque specification. See Capacities and Specifications on page 12‑2 for the wheel nut torque specification. When you reinstall the regular wheel and tire, you must also reinstall either the center cap or the bolt-on hub cap, depending on which your vehicle has. . 11. Tighten the nuts firmly in a crisscross sequence as shown by turning the wheel wrench clockwise. For center caps, line up the tab on the center cap with the slot in the wheel. The cap only goes in one way. Place the cap on the wheel and press until it snaps into place. For bolt-on hub caps, line up the plastic nut caps with the wheel nuts and tighten clockwise by hand to get them started. Then tighten with the wheel wrench until snug. . { WARNING Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should (Continued)