2011 Chevrolet Tahoe Owner's Manual - Page 67

Seats and Restraints Storing Memory Positions To save into memory: 1. Adjust the driver seat, seatback recliner, both outside mirrors, and the throttle and brake pedals, if equipped. See Power Mirrors on page 2‑17 and Adjustable Throttle and Brake Pedal on page 9‑29 for more information. Not all mirrors and adjustable throttle and brake pedals will have the ability to save and recall their positions. 2. Press and hold "1" until two beeps sound. 3. Repeat for a second driver position using "2." To recall, press and release "1" or "2." The vehicle must be in P (Park). A single beep will sound. The seat, outside mirrors, and adjustable throttle and brake pedals will move to the position previously stored for the identified driver. Memory Remote Recall The memory feature can recall the driver seat, outside mirrors, and pedals, if equipped, to stored positions when entering the vehicle. To activate, unlock the driver door with the Remote Keyless Entry (RKE) transmitter. The driver seat, outside mirrors, and adjustable pedals, if equipped, will move to the memory position associated with the transmitter used to unlock the vehicle. 3-5 This feature can be turned on or off using the vehicle personalization menu. See "Memory Seat Recall" under Vehicle Personalization (With DIC Buttons) on page 5‑48 for more information. To stop recall movement, press one of the power seat controls, memory buttons, or power mirror buttons, or the adjustable pedal switch. If something has blocked the driver seat and/or the adjustable pedals while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds. Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service.