2011 Chevrolet Tahoe Owner's Manual - Page 457

Vehicle Care WARNING (Continued) 6. Place wheel blocks on both sides of the tire at the opposite corner of the tire being changed. When the vehicle has a flat tire (B), use the following example as a guide to assist in the placement of the wheel blocks (A). 10-73 Tire Changing Removing the Spare Tire and Tools The equipment you will need to change a flat tire is stored under the storage tray, which is located on the driver side trim panel (over the rear wheelhouse). 2. Remove the wing nut (B) used to retain the tool bag by turning it counterclockwise. 3. Turn the knob (A) on the jack counterclockwise to release the jack and wheel blocks from the bracket. A. Wheel Block B. Flat Tire The following information explains how to use the jack and change a tire. 4. Remove the wheel blocks and the wheel block retainer by turning the wing nut (C) counterclockwise. Regular Wheelbase Shown, Extended Wheelbase Similar 1. Remove the tray to access the tools by pulling up on the finger depression under the jack symbol.